You will need:
Scissors
One piece of construction paper
A pencil and/or pen for marking
A luncheon plate or bowl for making the circle
A ruler
Glue - I prefer Tacky
Rubber band and binder clips
Heat-n-Bond Lite
Pretty fabric
Pretty trims
Buttons/beads
And now you are ready to go.......but first......skim over the photos to see what you will be doing and then come back and begin the project. Read the directions carefully.
Begin by placing your bowl or plate on the construction paper. Trace around it to make a circle. With your ruler, mark two strips that are 3/4" wide and the width of the paper that will be used for the handle.
Cut out the circle and the handle strip as shown. At this time, do not cut the handle into two strips!
Place the strip and the circle on your chosen fabric and cut a section of fabric as shown in the photo below.
The next step will be to fuse the fabric to the paper pieces. Cut a piece of Heat-n-Bond Lite the same size as your fabric piece. See below.
Iron the fusible to the fabric per package directions.
In the photo above, the fabric has been fused. Do not remove the paper backing yet. You are ready to trace the handle strip and circle to the reverse side of the fused fabric piece.
In the photo above, the pieces have been traced and are ready to be cut out. Set the handle pieces aside. We will work on the basket shape first.
With your circle cut out, you can now peel away the paper backing and iron the fabric circle to the construction paper circle per directions on fusible package.
1 comment:
GOOD tutorial so far...and I"m sure the rest of it will be just as clear!
Post a Comment